All of the all of the screening wall panels and pocket columns in this neighborhood have been rebuilt due to rusted track wire and pier movement of the columns. You can see the accents on the panels and columns showing a variety of color chosen by the HOA from samples recommended by Brick & Stone Master.
Brick Wall Demolition
After demoing the panels to the ground, when accessible we will use our skid steer bucket to expedite the loading and hauling off of the old material.
Hot Dipped Galvanized Angle Iron
Screening Wall Site Plan
This is one of our 2019 site plan neighborhoods. As you can see, we track the digression of the individual walls on an annual basis, only rebuilding the top priority each year. We can set expectations and future analysis cost as well throughout this process.
Rusted Track Wire Inside Panels
We separate all of the rusted wire carefully when demoing the existing panels so it can be recycled properly and safely.
Rusting Wire without Angle Iron Support
Here you can see the amount of integrity loss due to the rusting ladder wire on the inside of the panel. This causes the mortar joints to deteriorate and without an angle iron support they will drop in the center.
Next Phase of Panel Rebuilds
We will work with HOA budgets when needed to optimize and prioritize the worst sections throughout the perimeter. You can see the old brick and the rusting ladder wire on the left panel, and the new brick with accents on the right. The skirt along the bottom was also eliminated to reduce future maintenance.
Brick Wall Repair
These perimeter walls have lost 100% of the integrity and now they must be built out of emergency necessity versus pro activeness. Cities will fine neighborhoods throughout DFW that allow their walls to deteriorate to this point and they become a major safety hazard to homeowners.
Brick by Brick Rebuilding New Panels
This is a new brick from mock panels built by Brick & Stone Master to match a 20 year old failing screening wall in Southlake, Texas.
Demoing Existing Panel
It isn’t always easy to knock down and remove these walls when they are laced back into the adjacent columns or if they are 20’+ long like this panel is.
Precision Brick Laying
We measure out each bond to commercial standards and tool the mortar at the appropriate time.
Dumping Clean Fill Brick
Newly Built Section of Brick Wall
6513 Smithfield Road St B North Richland Hills, Texas 76182
Main Office 817-485-7200 Email Info@brickandstonemaster.com